Skip to main content

IIR Filter design

Lots of time was spent in designing a High Pass IIR Filter using IIM, but in the end we realized that it was not possible. This was because of the many-to-one mapping of frequencies when using IIM method of filter design.

Comments

  1. Unknown15 May 2018 at 21:15

    very cool

    ReplyDelete
  2. Unknown15 May 2018 at 22:37


    IIR filters are the most efficient type of filter to implement in DSP.

    ReplyDelete
  3. aniketwebslider15 May 2018 at 22:51


    Why is MATLAB used for this?

    ReplyDelete
  4. Unknown15 May 2018 at 23:26

    Bilinear Transform is preffered over IIM for designing High pass filters and Band-stop filters. Moreover, it has one to one mapping and no aliasing effect as in IIM.

    ReplyDelete
  5. Unknown16 May 2018 at 08:12

    Because of the feedback necessary in an implementation, the Infinite Impulse Response (IIR) Filter is also called a recursive Filter.

    ReplyDelete
  6. Srijal16 May 2018 at 09:05

    Since we had to plot the magnitude spectrums, MATLAB is a better choice as it has inbuilt plotting functions.

    ReplyDelete
  7. Unknown16 May 2018 at 10:17

    IIM is also not suitable for Band Pass Filter design because of the same reason.

    ReplyDelete

Post a Comment